{"id":12133,"date":"2022-08-09T18:03:03","date_gmt":"2022-08-09T18:03:03","guid":{"rendered":"https:\/\/powerside.com\/?p=12133"},"modified":"2023-03-02T17:56:38","modified_gmt":"2023-03-02T17:56:38","slug":"supraharmonic-measurements-in-distributed-energy-resources-power-quality-observations-in-a-microgrid","status":"publish","type":"post","link":"https:\/\/modomodostage.com\/_client\/PWS\/PWS101\/supraharmonic-measurements-in-distributed-energy-resources-power-quality-observations-in-a-microgrid\/","title":{"rendered":"Supraharmonic Measurements in\u00a0Distributed Energy Resources \u2013 Power Quality Observations in a Microgrid"},"content":{"rendered":"\n

By: Mattewos Tefferi, Nick Nakamura, Brad Barnes, Nenad Uzelac<\/h4>\n\n\n\n

Power systems are experiencing a significant transformation with the implementation of emerging technologies to face the 21st century challenges such as decarbonization, digitization, and decentralization. The penetration of renewable energy is increasing worldwide and initiatives such as distributed energy resources (DERs) based microgrids play a vital role in generating electrical power with less environmental impacts.<\/h4>\n\n\n\n

The operation of a microgrid depends on successful integration of DERs, relying on several factors such as hosting capacity, anti- islanding, synchronization and power quality. Modern renewable energy sources use power electronic systems such as rectifiers, DC\/DC converters, and DC\/AC inverters that are susceptible to emitting power quality phenomena into the network such as voltage instability, harmonics, frequency instability, and flicker. The continuous increase in switching frequencies resulting from these power electronics technologies has led to the emergence of conducted emissions in the range of 2 to 150 kHz (supraharmonic frequency), outside the traditional frequency range for power quality. Supraharmonics have the potential to disrupt network operations by damaging capacitors, disrupting communications, degrading dielectric insulation, and mis-operating relays\/controls. These symptoms can negatively affect the operation of street lighting controls, household dimmers, semiconductor manufacturing equipment, medical scanners, security systems, and transportation controls. Traditional technologies used on the grid today may not have the capability to properly measure and detect this new, emerging supraharmonic threat to the electric power system reliability.This paper presents measurement observations of DER impact to voltage & frequency stability, utilizing state-of-art technologies available today. In the first part of the paper, seven test scenarios were performed in a microgrid test bed to intentionally introduce disturbances and measure the resulting impact. In the second part, an unintentional event occurred in the microgrid, and the resulting measurements were recorded and evaluated.<\/p>\n\n\n\n

The study was performed in a medium voltage (MV) microgrid with natural gas generators, battery storage, voltage regulators, solar panels, and a wind turbine. The measurement instrumentation in the microgrid includes a set of capacitive voltage divider sensors (0.5 class) certified to IEC 60044-7 and a Powerside PQube\u00ae 3 power quality analyzer certified to IEC 61000-4-30 Class A for data collection and analysis of the measurement data.<\/p>\n\n\n\n

High Accuracy Low Power Voltage Transformer (LPVT) Technology<\/h4>\n\n\n\n

Instrument transformers (ITs) are key technologies that enable applications for metering, protection, and control of modern power grids. Initiatives such as DERs and optimizing energy efficiency & resiliency are driving a need for high precision sensing technologies that can effectively monitor the state of the modern grid.<\/p>\n\n\n\n

Low Power Voltage Transformers (LPVTs) are typically based on either capacitive voltage dividers (CVDs) or resistive voltage dividers (RVDs) and are used to step down the primary MV to an appropriate low voltage signal measured by an intelligent electronic device (IED) such as a meter or controller.<\/p>\n\n\n\n

A CVD sensor consists of a series of two capacitive arms: a primary arm with low capacitance value, in the order of few pF, and a secondary arm with high capacitance value, typically hundreds of nF. On the other hand, a RVD comprises high primary resistor, in the order of 10~100 M\u2126 and low secondary resistor, typically 10~100k\u2126. Both technologies involve connections to the primary voltage and secondary voltage is then measured across the secondary arm.A key characteristic of CVD sensor technology used in DER applications is the dynamic measurement range and ability to measure and detect supraharmonics (2kHz~150kHz) phenomenon. LPVTs must maintain accuracy class over a wide band of frequency range. The frequency characteristics of CVD and RVD via the frequency sweeping method is shown in<\/strong> FIGURE 1<\/strong>. A constant voltage was applied, and the output voltage was monitored for both technologies. The cut-off frequencies were 7 kHz and 40 kHz for RVD and CVD respectively. The high cut-off frequency of CVDs makes it suitable for detecting high frequency, supraharmonic phenomenon up to 40kHz.<\/p>\n\n\n\n

\"\"